In the world of audiophiles, there is purist group militating for simplicity in tube amplification systems focusing on the use of the tube designed in the early days of tube technology: the directly heated triodes of which the most famous is the 300B. I300 is built around a simple 300B  push-pull without feedback which offers unequalled musiciality of this tube. After the preamplification using an ECC82, the signal feeds a phase inverter  (called Schmitt) followed by 6SN7 triodes sufficient to drive the 300B. The power supply is another strong point. In addition to the fact that each stage has its own power supply, particular care has been taken with the 300Bs themselves. As direct heated triodes, the heater is the cathode. This requires a very "clean" power supply with no less than seven separate power circuits. As for all our devices, transformers are designed and manufactured in our workshop. The one dedicated to the power supply, uses a magnetic circuit EI M6X of a design which gives  a very stable operation, without noise and with a reduced overheating. The output ones use a double CV38 magnetic circuit built according to our standards. The I300 is the only integrated with such an output transformer. A design mode that allows the device to appear much more powerful than its 10W may suggest!

Specifications

Type	Integrated Amplifier wiht remote control
Bias	Automatic
Power	10W - Class A
Input type	5 lines, 1 Bypass output, 1 loudspeakers output
Bandwidth	20 Hz to 55kHz @-3dB
Sensibility	100 mV
Number of blocks	1
Tubes list	4 x 300B, 2 x 6SN7, 3 x ECC82
Dimensions	40 X 40 X 25.5 CM
Weight	39Kg
Consumption	300 VA